Visbella Headlight Polishing Kit

Restores old and burnt-out headlights. Plastic headlight lenses can yellow and cloud over time, reducing the brightness of your headlights, and new headlights can be expensive. The Headlight Restoration Kit allows you to restore plastic lenses, including fresh headlights, taillights, fog lights and turn signals. Now you can achieve professional results with the Headlight Restoration Kit. The kit includes all the elements needed to complete the task.

Advantage and features:
Designed to restore clarity to headlight lenses that have become yellowed, cloudy or foggy.
The headlight lens restoration kit improves headlight performance.
Three easy steps: sand, polish and protect
Easier than replacing an old headlight.
Comes with easy-to-use instructions.
The headlight restoration kit does not include the polishing machine.
Restores headlights, rear fog lights or directional lights.
This kit is designed to restore 2 headlights.
Warning: May cause eye and skin irritation. KEEP OUT OF REACH OF CHILDREN!

Preparation: Clean the headlight lens with water. Protect the area around the lens to avoid scratches.
1.Grinding
-Wet the sanding disc and attach it to the hand sanding tool. Sand in sequence with the three grits to completely remove severe yellowing, fading and corrosion.
Note: Use the sanding discs from coarse to fine: P800 -> P1200 -> P2000. Otherwise, it will cause the restoration to fail.
2.Polishing
-Attach the Orange Polishing Disc to the hand tool and apply the polishing paste. Polish the lens until it returns to its original condition.
3.Protection
- Clean the headlight lens and make sure the lens is dry before continuing with this step.
- Make sure the headlights are not in direct sunlight (very important).
- Using the white sponge, apply the cleaner to the headlight glass.
- Let the protective liquid dry for 15 minutes.
Then, allow the liquid to harden in direct sunlight for 1 to 2 hours.
After step 3, keep the lens dry. Do not wash the car for 24 hours.

NOTE:
How to apply UV protective paste?
Use in a cool, shady place, apply UV Protective Paste with the white sponge, lightly to the surface of the lamp.
Wait 15 minutes 10-15min (time control is very important), then leave the car in direct sunlight (for more than 2 hours).

Precautions:
Avoid contact with eyes.
Avoid contact with skin or clothing.
Avoid breathing fumes.
Use only with adequate ventilation.
Do not swallow.
Wash thoroughly after work.
Close the container after each use.